How Much Does a Bathroom Vanity Cost in Kitchener? (2026)

Rob Drelini
June 14, 2026
4 min read
On This Page

A bathroom vanity in Kitchener-Waterloo typically costs anywhere from $300 for a basic off-the-shelf unit to $6,000 or more for a solid wood vanity built to your dimensions — before the countertop. Add a stone top, an undermount sink, and installation, and most homeowners spend between $1,500 and $5,000 on a finished vanity. Where you land depends on size, material, and how it’s built.

This guide breaks down realistic 2026 pricing for the Kitchener, Waterloo, Cambridge, and Guelph area so you know what to budget — and where it’s worth spending and where it isn’t.

Bathroom Vanity Cost by Type (2026)

The single biggest factor is how the vanity is made. Here’s what each type costs in the Waterloo Region, cabinet only:

  • Stock / off-the-shelf: $300 – $1,200 — Pre-made in standard sizes from a big-box store or warehouse. Quick and cheap, but limited sizes and usually particle-board or MDF construction.
  • Semi-custom: $1,200 – $3,500 — A wider range of sizes, finishes, and storage options, with better construction.
  • Custom solid wood: $2,500 – $6,000+ — Built to your exact dimensions in the material and finish you choose. A larger double-sink custom vanity (60"–72") can run $6,000 to $12,000.

At Kitchen & Bath World, our vanities pair solid maple doors and drawer fronts with a plywood box — no particle board, no MDF — which is why they hold up to bathroom humidity for decades rather than swelling at the bottom in a few years.

Bathroom Vanity Cost by Size

Width is the other major driver. As a rough guide for a quality semi-custom or custom vanity, cabinet only:

  • 24"–30" (small / powder room): $1,200 – $3,000
  • 36"–48" (standard single sink): $2,500 – $5,000
  • 60"–72" (double sink): $5,000 – $9,000+

If you’re not sure what size fits, our guide to vanity sizes and configurations and our post on best sizes for small bathrooms walk through the options.

What Else Adds to the Cost

The Countertop

The vanity top is a separate cost. For a standard vanity, expect $500 to $2,500 for a quartz or porcelain top, templated and installed. Larger or double-sink tops cost more. Our guide to vanity countertop materials compares the options.

The Sink and Faucet

An undermount sink adds $150 to $800 depending on whether it’s a separate basin or integrated into the top. Faucets range from $80 for a basic model to $500+ for a designer finish.

Storage and Upgrades

  • Soft-close drawers and doors: $100 – $300
  • Built-in organizers and dividers: $150 – $500
  • Extra drawers vs. a single cabinet: adds to the price but dramatically improves usability

Installation

Installing a vanity typically runs $200 to $600 if the plumbing stays in place. Moving the plumbing — relocating the sink to a new wall — adds significantly more, since it means opening walls and rerouting supply and drain lines.

Where Homeowners Get the Best Value

  • Spend on the box, not just the look. A solid wood vanity — maple doors on a plywood box, with dovetail drawers on soft-close undermount glides — costs more up front but won’t need replacing in five years like a swollen particle-board unit. Over the life of the bathroom, it’s the cheaper choice.
  • Keep the plumbing where it is. If the existing layout works, leaving the sink in place is the single biggest saver.
  • Prioritize drawers. Drawers cost a little more than doors but make a small bathroom far more functional.
  • Pair it with the right top. A quality quartz or porcelain top resists the water and toothpaste that destroy cheaper surfaces.

A vanity is also just one part of a larger budget — if you’re planning a full renovation, see our guide to bathroom renovation costs in Kitchener.

Get an Exact Price for Your Bathroom

The only way to know what your vanity will cost is to start with the size, layout, and finish you want. At Kitchen & Bath World, we design every vanity in 3D before anything is built, so you can see exactly what you’re getting — and what it costs — before you commit. We’ve been building solid maple cabinetry on plywood boxes on Victoria Street for over ten years.

Visit our showroom at 899 Victoria St N in Kitchener to see vanity styles and finishes in person, or request a free estimate.

Frequently Asked Questions

Answers to your renovation questions

How much should I budget for a bathroom vanity in Kitchener-Waterloo in 2026?

Most Kitchener-Waterloo homeowners spend between $1,500 and $5,000 on a finished vanity in 2026, including the countertop, sink, and installation. A basic off-the-shelf cabinet starts near $300, while a solid wood custom unit built to your dimensions runs $2,500 to $6,000 or more before the top. Size and construction drive the difference. For full renovations, see our bathroom renovation cost guide.

Is a solid wood vanity worth the extra cost?

Yes, a solid wood vanity is usually the cheaper choice over the life of the bathroom because it won't swell and need replacing in five years like a particle-board unit. You spend more up front but avoid a second purchase. Kitchen & Bath World builds vanities with solid maple doors on a plywood box — no MDF — with dovetail drawers on soft-close glides. See why construction matters in our solid wood vs. particle board comparison.

How much does it cost to install a bathroom vanity?

Installing a vanity typically runs $200 to $600 when the plumbing stays in place. Relocating the sink to a new wall costs significantly more, since it means opening walls and rerouting supply and drain lines. Keeping the existing layout is the single biggest way to save. Planning a larger project? Our Cambridge and Guelph renovation guide covers where trades fit in.

Does the vanity price include the countertop?

No, the countertop is a separate cost from the vanity cabinet. Expect $500 to $2,500 for a quartz or porcelain top, templated and installed, with double-sink tops costing more. A quality non-porous top resists the water and toothpaste that destroy cheaper surfaces. Compare your options in our vanity countertop materials guide before you choose a finish.

What size bathroom vanity do I need?

Vanity width is set by your bathroom: 24"–30" suits powder rooms, 36"–48" fits a standard single sink, and 60"–72" works for double sinks. Cost climbs with width. Drawers cost slightly more than doors but make a small bathroom far more functional. Kitchen & Bath World designs each vanity in 3D so the fit is exact. See our vanity sizes and configurations page.

Where do Kitchener homeowners get the best vanity value?

The best value comes from spending on the box, keeping the plumbing where it is, and prioritizing drawers over doors. A solid maple-fronted cabinet on a plywood box, paired with a durable quartz or porcelain top, costs more initially but avoids replacement and resists daily wear. Kitchen & Bath World has built solid maple cabinetry at 899 Victoria St N for over ten years. Request a free estimate for an exact price.

Have more questions? Were here to help.

Visit the Showroom or Request a Free Estimate

Come see the cabinets and finishes in person at 899 Victoria St N, Kitchener — or fill out the form and our team will get back to you about your kitchen or bath project.

Frequently Asked Questions

Answers to your kitchen renovation questions

How do I request a free estimate?

Simply fill out our online form or call us during business hours. Well schedule a visit or in-showroom consultation at your convenience.

What products do you offer?

We provide kitchen cabinets, bathroom vanities, countertops, and accessories. All products are available in a range of styles and finishes.

Do you serve contractors and homeowners?

Yes, we work with both homeowners and contractors across Kitchener, Waterloo, Cambridge, and Guelph.

Can I visit your showroom?

Absolutely. Visit us at 899 Victoria St N, Kitchener, ON. No appointment needed during business hours.

What is your warranty policy?

All cabinetry and countertops come with a manufacturers warranty. Details are provided at purchase or upon request.

How long does installation take?

Most kitchen or bath projects are completed within 24 weeks after final measurements and product selection.

Need more information? Were here to help.